Matrix Audio SC-1 – Precision 10 MHz Reference Clock for Digital Audio Systems

The Matrix Audio SC-1 is a highly precise 10 MHz reference clock for streamers, DACs, and CD players with an external clock input. At its core is a specially developed OCXO with an SC-cut crystal, which achieves exceptionally low phase noise and high long-term stability through temperature-controlled regulation. Matrix Audio specifies phase noise of down to ≤ −118 dBc/Hz at 1 Hz, along with a warm-up time of under five minutes at 25 °C.
Four independently buffered BNC outputs provide synchronized 10 MHz signals, ensuring stable output impedance and high drive capability even when multiple outputs are used simultaneously. The SC-1 is available with either a sine wave or a square wave output – the waveform is set at the factory and cannot be switched. The unit also features a 1PPS reference input for external calibration.
The linear power supply with automatic voltage adjustment uses separate, multi-stage regulated circuits for the oven control and clock circuitry to minimize interference. A resonance-optimized enclosure with CBVB damping feet further supports a stable operating environment. This makes the SC-1 a specialized master clock for high-end digital audio chains – for example for the NT-1 network transport and the ND-1 DAC of the N Series.
Important: sine or square wave output
The SC-1’s waveform is set at the factory and cannot be switched later. For use with Matrix Audio devices such as the NT-1 or ND-1, we automatically supply the right version. If you plan to use the SC-1 with a device from another manufacturer, we are happy to check compatibility with you before you order.
Highlights
- Proprietary OCXO with SC-cut crystal, 10.000 MHz
- Ultra-low phase noise: ≤ −118 dBc/Hz at 1 Hz, jitter 20 fs (1–100 Hz)
- 4 × BNC output with individual buffers, 50 Ω – for several devices at once
- Sine or square wave: set at the factory – we supply the right version for your system
- 1PPS input for automatic recalibration with status LED
- Linear power supply with automatic voltage detection and separate regulators for oven and clock
- Compatible with any device with a 10 MHz input, e.g. the NT-1 and ND-1
Design and Technology
At the heart of the SC-1 is an OCXO (oven-controlled crystal oscillator) developed in-house by Matrix Audio, using an SC-cut crystal. On delivery, frequency accuracy is better than ±0.01 ppm, temperature stability better than 0.003 ppm between −40 and +70 °C, and short-term stability better than 5 × 10⁻¹³ at τ = 1 s. Phase noise drops to a noise floor of ≤ −170 dBc/Hz.
The linear power supply detects the mains voltage automatically, protects against over- and undervoltage, and feeds the oven control and clock circuitry through separate multi-stage regulators. The perforated enclosure in Matrix Audio’s signature design rests on CBVB vibration dampers that keep external vibrations away. A front LED flashes while the oscillator warms up and stays lit once it is stable.
- Oscillator: OCXO with SC-cut crystal, developed in-house by Matrix Audio
- Frequency: 10.000 MHz
- Frequency accuracy (on delivery): better than ±0.01 ppm
- Temperature stability: better than 0.003 ppm (−40 to +70 °C)
- Short-term stability: better than 5 × 10⁻¹³ (τ = 1 s)
- Jitter: 20 fs (1–100 Hz)
- Warm-up time: < 5 minutes at 25 °C
- at 1 Hz: ≤ −118 dBc/Hz
- at 10 Hz: ≤ −140 dBc/Hz
- at 100 Hz: ≤ −150 dBc/Hz
- at 1 kHz: ≤ −160 dBc/Hz
- Noise floor: ≤ −170 dBc/Hz
- Clock outputs: 4 × BNC, each with its own driver buffer, all from the same source
- Output frequency: 10 MHz
- Output impedance: 50 Ω
- Output level: 0.5 Vrms (sine) or 1 Vrms (square)
- Waveform: sine or square, set at the factory (not switchable) – please check before ordering for third-party devices
- 1PPS input: automatic recalibration from an external pulse-per-second signal, status LED on the front
- Indicator: LED for power and warm-up status
- Compatible with: streamers, DACs and CD players with a 10 MHz reference input, e.g. the NT-1 and ND-1
- Mains voltage: AC 100–120 V or AC 220–240 V (50/60 Hz), automatic detection
- Power supply: linear, over- and undervoltage protection, separate multi-stage regulators for oven control and clock circuitry
- Power consumption: < 20 W
- Weight: 4.4 kg (9.70 lb)
- Dimensions (W × D × H): 330 × 267 × 97 mm (12.99 × 10.51 × 3.82 in)
- Power cable
- Printed documentation (user manual)
























Reviews
There are no reviews yet.