The Matrix Audio MA-1 is a power amplifier for people who don’t just “play” music, but want it to become a physical experience in the room. It drives real loudspeakers with an ease you don’t understand through features alone — you hear it instantly: more body, more stability, more control at every volume level.
Highlights
- 2 × 250 W into 8 Ω, 2 × 450 W into 4 Ω – up to 900 W into 4 Ω when bridged
- High-bias design and parallelized output stage with 10 power transistors per channel for control and effortless smoothness
- Fully balanced architecture with XLR and RCA inputs for flexible system integration
- Stereo / Mono / Bridged modes: scales seamlessly with your system
- Developed as the reference power amplifier of the M-Series — voiced for tonal coherence and musical unity

Listening to music has become an everyday commodity. Like a toaster in the kitchen: switch it on, something happens, done. Streaming has made music available everywhere — and at the same time often stripped it of meaning.
These components are for the moment when it becomes clear: music is not a function — it is an experience. They are built to give music its weight back.
The MA-1 is for the moment when you realize: I don’t want “good enough.” I want music to move me.
A high-quality amplifier doesn’t simply add “more bass” or “more treble.” It does something far more important: it removes strain from the system. Suddenly, a voice stands firmly in space. A piano has weight. A beat has punch without becoming aggressive. And even at low volumes, everything remains complete.
The MA-1 was built precisely for this: to truly control loudspeakers, rather than just drive them somehow. The result is not a “Hi-Fi show,” but authority — and that feeling that the system simply feels right.
Uncompromising Design
The MA-1 is a Class AB push-pull power amplifier with 10 high-power onsemi transistors per channel, operated with a high bias current. This keeps the crossover region – where simpler amplifiers start to sound harsh – largely out of play, so the MA-1 stays smooth and controlled even at high output levels.
The power supply is fully separated for both channels: two independent transformers with a combined 1250 VA and 190,000 µF of filter capacitance ensure that dynamic peaks and difficult loudspeakers down to 2 Ω are driven with ease. With a damping factor of 350, the MA-1 keeps woofers firmly under control.
Paired with the MP-1 preamplifier and the MS-1 network streamer, the MA-1 forms the foundation of the M-Series. The 12 V triggers let you switch all components on and off together.
- Input impedance (XLR / RCA): 40 kΩ / 20 kΩ
- Input sensitivity: 1.48 Vrms (stereo/mono), 1.0 Vrms (bridge mode)
- Output power (stereo/mono): 2 × 250 W RMS into 8 Ω, 2 × 450 W RMS into 4 Ω
- Output power (bridge mode): 1 × 500 W RMS into 8 Ω, 1 × 900 W RMS into 4 Ω (music signal only)
- Frequency response: 20 Hz–20 kHz (+0 / −0.15 dB), 160 kHz at −3 dB
- Signal-to-noise ratio (SNR): 119 dB at +24 dB gain, 123 dB at +30 dB gain (A-weighted)
- Total harmonic distortion + noise (THD+N): < 0.02 % (250 W / 8 Ω, stereo/mono), < 0.06 % (500 W / 8 Ω, bridge)
- Crosstalk: −125 dB
- Gain: +24 dB / +30 dB
- Speaker impedance: 2–16 Ω (stereo/mono), 4–16 Ω (bridge)
- Damping factor: 350 (8 Ω, 1 kHz)
- Inputs: XLR (40 kΩ) and RCA (20 kΩ)
- Operating modes: stereo, mono and bridged
- Gain: switchable +24 dB / +30 dB
- Trigger input: DC 6–12 V, < 10 mA
- Trigger output: DC 12 V, max. 50 mA
- Topology: Class AB push-pull, 10 onsemi power transistors per channel
- Power supply: two separate transformers, 1250 VA combined, 190,000 µF filter capacitance
- Mains voltage: AC 100–120 V (50/60 Hz) or AC 220–240 V (50/60 Hz), factory preset
- Standby power consumption: < 1 W
- Idle power consumption: 250–350 W
- Maximum power consumption: < 1250 W
- Weight: 42.4 kg (93.5 lb)
- Dimensions (W × D × H): 430 × 518 × 201 mm (16.93 × 20.39 × 7.91 in)
- Power cable
- Trigger cable
- User manual
- Warranty card
























Reviews
There are no reviews yet.